Department of Chemical and Biomolecular Engineering
Korea Advanced Institute of Science and Technology

Recent Achievements


[Inside Back Cover] Rationally Designed Donor–Acceptor Random Copolymers with Optimized Complementary Light Absorption for Highly Efficient All-Polymer Solar Cells

Title: Rationally Designed DonorAcceptor Random Copolymers with Optimized Complementary Light Absorption for Highly Efcient All-Polymer Solar Cells


Author: Sang Woo Kim, Joonhyeong Choi, Thi Thu Trang Bui, Changyeon Lee, Changsoon Cho, Kwangmin Na, Jihye Jung, Chang Eun Song, Biwu Ma, Jung-Yong Lee, Won Suk Shin,* and Bumjoon J. Kim*


Journal: Adv. Funct. Mater. 2017, 27, 1703070


Abstract: Most of the high-performance all-polymer solar cells (all-PSCs) reported to date are based on polymer donor and polymer acceptor pairs with largely overlapped light absorption properties, which seriously limits the efciency of all-PSCs. This study reports the development of a series of random copolymer donors possessing complementary light absorption with the naphthalenediimide-based polymer acceptor P(NDI2HD-T2) for highly efcient all-PSCs. By controlling the molar ratio of the electron-rich benzodithiophene (BDTT) and electron-decient uorinated-thienothiophene (TT-F) units, a series of polymer donors with BDTT:TT-F ratios of 1:1 (P1), 3:1 (P2), 5:1 (P3), and 7:1 (P4) are prepared. The synthetic control of polymer composition allows for precise tuning of the light absorption properties of these new polymer donors, enabling optimization of light absorption properties to complement those of the P(NDI2HD-T2) acceptor. Copolymer P1 is found to be the optimal polymer donor for the fullerene-based solar cells due to its high light absorption, whereas the highest power conversion efciency of 6.81% is achieved for the all-PSCs with P3, which has the most complementary light absorption with P(NDI2HD-T2). 









첨부파일 다운로드




  • 페이스북 공유
  • 트위터 공유
  • Google+ 공유
  • 인쇄하기
스팸방지코드 :
Title:Three-Dimensional Interlocking Interface: Mechanical Nanofastener for HighInterfacial Robustness of Polymer Electrolyte Membrane Fuel Cells Author: SeongminYuk, Min-Ju Choo, Dongyoung Lee, Hwanuk Guim, Tae-Ho Kim, Dai Gil Lee, SungyuChoi, Dong-Hyun Lee, Gisu Doo, Young Taik Hong and Hee-Tak Kim Journal:Advanced Materials, 2017, 29, 1603056 Abstract: A scalable nano-fastener fe...
Title: Metabolic Engineering of Escherichia coli for the Production of 3‑Hydroxypropionic Acid and Malonic Acid through β‑Alanine Route   Author: Chan Woo Song, Je Woong Kim, In Jin Cho, and Sang Yup Lee   Journal: ACS Syn. Biol., 5(11): 1256-1263 (2016. 11)   ABSTRACT: Escherichia coli was metabolically engineered t...
Title: A Low-Voltage Organic Complementary Inverter with High Operation Stability and Flexibility Using an Ultrathin iCVD Polymer Dielectric and a Hybrid Encapsulation LayerAuthor: Hyejeong Seong, Junhwan Choi, Byung Chul Jang, Mincheol Kim, Seunghyup Yoo, Sung-Yool Choi, and Sung Gap Im* Journal: Advanced Electronic Materials, 2016, Vol.2, p.1500385  Abstract: A low-volta...
Title: Synthesis of Ultrathin,Homogeneous Copolymer Dielectrics to Control the Threshold Voltage of OrganicThin-Film Transistors Author: Kwanyong Pak , Hyejeong Seong , Junhwan Choi , Wan Sik Hwang , and Sung Gap Im*Journal: Advanced Functional materials, 2016, Vol.26, p.6574–6582AbstractThis work demonstrates that thresholdvoltage (VT) of organicthin-fi lm transistors (OTFTs) can be contro...
Title : High molecular weight bio furan-based co-polyesters for food packaging applications: synthesis, characterization and solid-state polymerization Authors : Sungmin Hong, Kyung-Deok Min, Byeong-Uk Nam and O Ok Park* Journal : Green Chemistry, 2016, Vol.18, p.5142-5150 AbstractThe goal of this study was to develop ecofriendly bioplastics, which could be applicable in bevera...